Vinyl – ANTI-BACTERIAL 100% ECOLOGICALLY CLEAN water dispenser- sion paint of excellent quality for interior and exterior use, based on PVA-VEOVA copolymers. Thanks to its wonderful antibacterial effect, it is suitable for use on any surface, that have mold or may mold. It covers the surface very well, gives an excellent white color and has exceptional resistance to frequent washing and to harmful atmospheric influences. It is easy to apply and makes the surface smooth. The water dispersion paint NEOLUX ANTIBACTERIAL can be used on previously prepared surfaces of any material. No smell during painting, as it does not contain volatile substances.

 

Surface preparation

The surfaces must be clean, dry and smooth, dusty, grease and bits of old paint. Use acrylic putty MARMOLUX or elastic 100% acrylic whale, To fill the cracks and holes. New plaster surfaces, concrete, cement, mortar, plaster, plasterboard etc. must first be passed with 100% the MARMOLUX water-based acrylic primer, diluted to 500% with water or PRILUX primer, diluent. Surfaces, which are whitewashed must be primed with PRIDUR ECO or, PRIDUR alkydene. Smoke-contaminated surfaces, graffiti, coffee or other stains, must first be primed with the water-soluble primer AQUALIN ECO. Moldy surfaces should first be washed with water and a little detergent, low in sodium chloride (1-2%).

 

Coloring

Available in white and above 10 000 colors tinted with TM-300 tinting system.

 

Drying

Dry 30-60 i.

 

Re -painting

Can be repeated after 3-4 hours, Depending on the weather conditions.

 

Coverage

9 – 10 sq.m./l. (for 2 layers), Sowing Elot 721-82, on pre -prepared surfaces.

 

Dilution

15-25% with water for roller or brush application and
35-40% with an airless gun.

 

Application

Apply with a roller, brush or pistol for painting.

 

Cleaning the tools

The instruments should be cleaned immediately after use with water and, If necessary, with soap solution or detergent.

 

Content of volatile organic compounds

The maximum VOC value for this product for the European Union (Directive 2004/42/are), (category A/a "Interior matt walls and ceilings (Glance ≤25@60º)”, Tип WB) is 75 gr/l (2007), 30 gr/l (2010). Готовият за употреба продукт на Витекс съдържа максимално 15 гр/л летливи органични вещества.

 

ВИСКОЗИТЕТ

110 ± 10 K.U. (STORMER, 25oC).

 

ИНДЕКС ЗА БЕЛОТА

~96 за бялата (ASTM E313-98).

 

ИНДЕКС НА ПОЖЪЛТЯВАНЕ

~0 за бялата (ASTM E313-98).

 

ГЛАНЦ

< 3 единици при 60% (ELOT EN ISO 2813).

 

ALKALI RESISTANCE

No change (ELOT 788).

 

FREQUENT WASHING AND RUBBING TEST

It doesn't change after 10 000 the cycle (ELOT 788).
Complete durability of the fine layer is achieved after a minimum 3 weeks.

 

Rainwater

Excellent. The movie doesn't change (There is no swelling, cracking, dust and powder, etc.). Does not change color and shine (ELOT EN ISO 2810).

 

Minimum application temperature

+5⁰C (ELOT 788).

 

Storage

1 year under appropriate conditions. Ideal for storage temperatures are from +5⁰C to +38⁰C.

 

Precautions

Keep out of reach of children. If swallowed, да се потърси незабавно медицинска помощ и да се покаже етикета или опаковката. Да не се излива в канализацията.